what's the settings about cut through balsa wood ?Part 1
Hello ,friends , nice day !
I gonna to show you what's the settings about cut through balsa wood ,about this ,there also have video on YouTube:https://www.youtube.com/watch?v=9yaTKqNt_Pg&feature=youtu.be
Generally, balsa wood is easy to cut. Machine Type: Bachin D8-4050P, 2500mW
software: Engraver Master >>> NC Sender
for 2500mW laser engraving machine , the thickness of 1-3 mm will easy to cut through.
1\First method :low speed ,one time cut through
speed:280 or 290, repeats:1,laser power:100%, acceleration :800-1000,thickness of the wood : 1.81 mm;
2\Second method :quick speed ,repeat 1~2 cut through
the above fish.png for example :
speed:610, repeats:2,laser power:100%, acceleration :800-1000:
this method is better than first one , the edge of cutting looks better.
The thickness like 2 mm or 3 mm ,will repeat 2~3 times ,speed :410 ~600.
see the effects:
The Original file：
CofC last edited by
a trick i use is to spray the material with clear acrylic lacquer before lasering.
the acrylic will melt, flow and stifle combustion, keeping the line from growing wide and uneven.
@cofc thanks for your trick,i will try and share the effect