Bachin Draw T2039 Problem



  • Hello everyone.
    I have a serious problem ...
    I did an upgrade through the engraver master program.
    The problem is that another version of grbl has been uploaded
    I returned to version 1.1f while in the bachin draw application in settings I don't have the target machine which is T2039 but Grbl ..
    I lost the ability to switch to a pen and the machine works completely differently.
    I was looking on the official bachin website how to make flesch arduino nano, there is such an option but there is no attached hex file to my machine ..
    Even when I upload a hex file from another machine, it works completely differently than on the factory software bachin T2039 ...
    Please, if someone has such a file to share, I would be very grateful.


  • administrators

    Dear friend ,i suggest you delete the software and download the new one .http://bachinmaker.com/wiki/doku.php?id=bachin_draw



  • @ljx said in Bachin Draw T2039 Problem:

    Dear friend ,i suggest you delete the software and download the new one .http://bachinmaker.com/wiki/doku.php?id=bachin_draw

    Hello, I have installed the software several times to restore the factory parameters of the robot. Although it remains unchanged, it needs a Hex file. Regards.